Setting a component code by the Search function

You can find a code number available for a component that doesn’t have one in the supplied “Component Code Numbers”.

Before starting the Search function

Set each component to the following status so that the Search function works effectively.

TV: Power-on

VCR, SAT, CBL, DVD, AMP: Power-off

VD, CD, MD, TAPE: Power-on with a playback source (disc, cassette tape, etc.)

1Press S (set).

All Component Select buttons flash.

2Press the Component Select button for the desired component.

The selected Component button lights up, and all other buttons turn off.

3Press CH + or CH – and POWER in turn until the component reacts as decribed in the following.

Powers off: TV

Powers on: VCR, SAT, CBL,

DVD, AMP

Plays back: VD, CD, MD, TAPE

Press CH + to go to the next code number.

Press CH – to go back to the previous code number.

The Component button flashes three times after the numbers have turned one cycle.

Note

Always be sure to first press CH+/- before pressing POWER. Otherwise the Search function does not work properly.

Continued

11