Sony RM-VL900 Transferring Data between Remote Commanders, Transferring the data

Transferring Data between Remote Commanders

You can transfer the data, such as “learned” signals and component code settings, between this Commander and another Sony RM-VL900 or a Sony RM-AV2100 remote commander.

2Press and hold S (set) for more than 3 seconds.

The S (set) indicator lights up, and all Component Select buttons flash.

If you want to exchange data with a Sony RM-AV2100

Refer to “Data Transfer” instructions in the RM-AV2000 manual for the necessary procedures.

Note on remote commanders

You can transfer data between remote commanders with the mark. Other remote controls cannot be used to transfer data.

Transferring the data

You can transfer all data of this Commander or the data of a Component Select button on this Commander to another Sony RM-VL900 or RM-AV2100.

To transfer all data of the Commander

1Place the RM-VL900 head to head with another remote commander.

Another remote commander

3While holding cursor v pressed, press the Number 1 button.

The S (set) indicator flashes and all Component Select buttons light up.

about 2 – 4 inches
(5 – 10 cm) away	RM-VL900