Programming a Frequently Used Key Operation for

SYSTEM CONTROL Buttons

In addition to their original System Control functions (see page 23), SYSTEM CONTROL 1, 2 or 3 buttons can be programmed to “learn” any remote control signal.

As they operate independently from other buttons, SYSTEM CONTROL 1, 2 or 3 buttons can work as one-touch buttons without any preceding operation such as pressing a Component Select button to select a component.

This is useful if you prefer having the SYSTEM CONTROL button as a “one-touch” button for a single operation rather than executing a series of commands.

Note

Some specific remote control signals may not be learned.

Example: To store the On/Off signal of an air-conditioner to the SYSTEM CONTROL 2 button

1Place the Commander head to head with the remote control of the air- conditioner.

Remote control of your air-conditioner

about 2 – 4 inches

 

(5 – 10 cm) away

RM-VL900

2Press and hold S (set) for more than 3 seconds.

The S (set) indicator lights up, and all Component Select buttons flash.

Continued

35