Executing a Series of Commands

—System Control Function (continued)

Programming a series of commands to the SYSTEM CONTROL buttons

If a series of commands is already programmed on that button

(At the factory, the SYSTEM CONTROL 1 button is preset with the System Power-Off function for Sony components, and the SYSTEM CONTROL 3 button is factory preset with standard Power-On command for nearly all Sony components.)

To program a new series of operations, clear the program first (see page 26).

2Press SYSTEM CONTROL 2.

All Component Select buttons light up.

Example: To program the procedure for the video to the SYSTEM CONTROL 2 button

1Press S (set).

All Component Select buttons flash.

3Press the Component Select button for the component to operate.

The Component button lights up when you press it, and turns off when you release it.

24