Changing the interval between operation steps
You can control the interval in 4 steps (approx. 127 ms, 408 ms, 708 ms, 974 ms).
For the SYSTEM CONTROL buttons
1Press S (set).
All Component Select buttons flash. 
2While holding one of the
SYSTEM CONTROL buttons (1, 2 or 3) whose interval you want to change pressed, press one of the Number buttons (1 – 4) to select the interval.
1:Approx. 127 ms (the factory setting)
2:Approx. 408 ms
3:Approx. 708 ms
4:Approx. 974 ms (ms: 1/1000 second)
All Component Select buttons light up when you press these buttons, and turn off when you release them.
Note
If you press a Number button apart from 1 – 4, the S (set) indicator flashes twice, and the Commander returns to its state in Step 1. Be sure to select from 1 – 4.
Continued
29