Sony RM-VL900 Adding an Extra Function to the Component Select Buttons

Executing a Series of Commands

—System Control Function (continued)

For the Component Select buttons

1Press S (set).

All Component Select buttons flash.

2While holding one of the Component Select buttons whose interval you want to change pressed, press one of the Number buttons (1 – 4) to select the interval.

The Component Select button lights up when you press these buttons, and turns off when you release them.

Note

If you press a Number button apart from 1 – 4, the S (set) indicator flashes twice, and the Commander returns to its state in Step 1. Be sure to select from 1 – 4.

Adding an Extra Function to the Component Select Buttons

Programming the Power-On Command of the Selected Component (for Sony Components only)

When using Sony components, you can program the Power-On signal for each component on a Component Select button. You can select the desired component and power it on by just pressing that Component Select button.

Example: To program the TV button

1Press S (set).

All Component Select buttons flash.

30