Using Unpreset
Remote Control
Operations
— Learning Function
To operate unpreset components or functions, use the following Learning procedure to “teach” any of the programmable buttons to operate the functions of another remote control. You can also use the Learning function to change the signals of individual buttons after setting the component code number (page 8).
It is recommended that you make a note of the “learned” key functions.
Note
Some specific remote control signals may not be “learned”.
Example: To program the N (Play) signal of your component to the VCR N (Play) button of the Commander
1Place the
Remote control for your component
about 2 – 4 inches |
|
(5 – 10 cm) away |
2Press and hold S (set) for over 3 seconds.
The S (set) indicator lights up, and all Component Select buttons flash.
Continued
15