Changing or erasing the function of a “learned” button
To change the “learned” function, clear it first and perform Learning again.
To clear the “learned” function of a single button
Example: To erase the “learned” function from the Number button 1 in VCR mode.
1Press and hold S (set) for over 3 seconds.
The S (set) indicator lights up, and all Component Select buttons flash.
2While holding the desired Component Select button pressed, press the button you want to erase.
The S (set) indicator turns off, and the selected Component button lights up.
Note
Be sure to press both buttons at once. If you release the Component Select button, the Commander changes to Learning mode.
3Press S (set) to finish setting.
Continued
19