Location of Controls
1 S (set) button
2 Set indicator
3 Component Select buttons
Light or flash during operation.
4 Number buttons/AMP INPUT select buttons
5 PIP button
6 TV/VIDEO button
7 DISPLAY button
8 Player Control buttons
9 Cursor Control & OK buttons
0 MENU button qa VOL +/– buttons* qs MUTING button*
qd SYSTEM CONTROL buttons qf POWER button
qg ENT (enter) button qh SLEEP button
qj GUIDE button
qk CH (channel) +/– buttons ql RECALL button
* Note on the VOL +/– and
MUTING buttons
The Commander controls or mutes the TV’s volume when you select a visual component. The Commander controls or mutes the amplifier’s volume when you select an audio component.
You can change this setting also (page 21).
NOTE
The function of control buttons vary depending on settings/operating modes. “Table of Preset Functions” (page 50) shows how the Commander generally operates for each component at preset mode.
These settings can be changed, and some buttons are used specifically in the setup procedure as described in the following pages.
7