Sony STR-DG920 ?/1, Name, Note, D TV, 10US, B ?/1, C AMP, CLEAR, operate, Numeric, buttons, (number, ENT/MEM, Function, A AV ?/1, STANDBY), HDD COMBO, operation

Name	Function
A AV ?/1	Press to turn on or off the
(on/standby)	audio/video components that
	the remote is programmed to
	operate.
	To turn the TV on or off, press
	TV (D) and then press AV
	?/1.
	If you press ?/1 (B) at the
	same time, it will turn off the
	receiver and other components
	(SYSTEM STANDBY).
	Note
	The function of the AV ?/1
	switch changes automatically
	each time you press the input
	buttons (E).
B ?/1	Press to turn the receiver on or
(on/standby)	set it to the standby mode.
	To turn off all components,
	press ?/1 and AV ?/1 (A) at
	the same time (SYSTEM
	STANDBY).

	Saving the power in
	standby mode.
	When “Control for HDMI” is
	set to “OFF” (page 75).
C AMP	Press to enable the receiver
	operation (page 89).
D TV	Press to light up the button. It
	changes the remote key
	function to activate the buttons
	with yellow printing. It also
	activate the DISPLAY (U),
	OPTIONS TOOLS (K),
	HOME/MENU (L),
	RETURN/EXIT O (T),
	(J), and V/v/B/b (J)
	buttons to perform menu
	operations for Sony TVs only.

EInput buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components (page 45). You can program the remote to control non-Sony components following the steps in “Programming the remote” on page 99.

Name FunctionNumeric Press SHIFT (X), then pressbuttons numeric buttons to(number 5*) – preset/tune to preset stations.

–select track numbers of the CD player, VCD player, LD player, DVD player, MD deck, DAT deck, or tape deck. Press 0/10 to select track number 10.

–select channel numbers of the VCR, satellite tuner, Blu- ray disc player, PSX, DVD/ VHS COMBO, or DVD/

HDD COMBO.Press TV (D) and then press the numeric buttons to select the TV channels.ENT/MEM Press SHIFT (X), then press ENT/MEM to

–enter the value after selecting a channel, disc or track using the numeric buttons of the VCR, CD player, DVD player, LD player, MD deck, DAT deck, tape deck, satellite tuner, Blu-ray disc player, PSX, DVD/VHS COMBO, or DVD/HDD COMBO.

–store a station during tuneroperation.To enter the value of Sony TV, press TV (D) and then press ENT/MEM.CLEAR Press SHIFT (X), then press CLEAR to

–clear a mistake when you press the incorrect numeric button of the DVD player, Blu-ray disc player, PSX, satellite tuner, DVD/VHS COMBO, or DVD/HDD COMBO.

–return to continuous playback, etc. of the satellite tuner or DVD player.

10US