Sony STR-DG920 Resetting sound fields to the initial settings, Tips, 55US, Notes, Sound, DTS-HD, Enjoying, receiver, press POWER, When the sound field’s

Notes

•The sound fields for music and movies do not work in the following cases.

–The multi channel input is selected.

–DTS-HD signals with a sampling frequency of more than 48 kHz are being received.

–Dolby TrueHD signals with a sampling frequency of more than 48 kHz are being received.

–Signals with a sampling frequency of more than 48 kHz are being received.

–The multi channel PCM signals are received via a HDMI IN jack with a sampling frequency more than 48 kHz.

•When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to “LARGE” on the Speaker settings menu. However, the sound will be output from the subwoofer if

–the digital input signal contains LFE signals.–the front and surround speakers are set to “SMALL”.–the sound field for movie is selected.–“Portable Audio” is selected.

Tips

•You can identify the encoding format of DVD software, etc., by looking at the logo on the package.

•Sound fields with DCSmarks use DCS technology. See “Glossary” (page 104).

•When the sound field’s DCSmark is selected, the Digital Cinema Sound lamp lights up on the display.

Resetting sound fields to the initial settings

Be sure to use the buttons on the receiver for this operation.

1,2

POWER

			MASTER VOLUME
TONE MODE	TUNING MODE		DISPLAY INPUT MODE
		MULTI CHANNEL DECODING
TONE	TUNING		INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
	MEMORY/	2CH/
	ENTER	DIMMER A.DIRECT A.F.D.MOVIE	MUSIC	Enjoying
VIDEO 2 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R	AUTO CAL MIC
			2
				Surround
1 Press POWER to turn off the
receiver.
2 While holding down MUSIC,				Sound
press POWER.

“S.F. CLEAR” appears on the display and all sound fields are reset to their initial setting.

To turn off the surround effect for movie/musicSelect “2ch Stereo” or “A.F.D. Auto” in theSurround settings menu.55US