Sony STR-DG920 32US, To display Closed Caption, Notes on converting video signals

Notes on converting video signals

•When video signals from a VCR, etc., are converted on this receiver and then output to your TV, depending on the status of the video signal output, the image on the TV screen may appear distorted horizontally or no image may be output.

•HDMI video signals cannot be converted to component video signals and video signals.

•When you play back a VCR with an image improvement circuit, such as TBC, the images may be distorted or may not be output. In this case, set the image improvement circuit function to off.

•The resolution of the signals output to the

COMPONENT VIDEO MONITOR OUT jacks is converted up to 1080i. The resolution of the signals output to the HDMI OUT jack is converted up to 1080p.

•COMPONENT VIDEO MONITOR OUT jacks have restrictions on resolution when the resolution of video signals protected by copyright technology is converted.

Resolution of up to 480p can be output to the

COMPONENT VIDEO MONITOR OUT jacks. The HDMI OUT jack has no restriction on resolution.

•Set “Resolution” to “AUTO” or “480/576i” in the Video settings menu to output the video signals from the MONITOR VIDEO OUT, or COMPONENT VIDEO MONITOR OUT jack when both are connected.

To display Closed Caption

Set “Resolution” to “DIRECT” in the Video settings menu when receiving a signal that supports Closed Captions.

Use the same type of cords for the input/output signals.

32US