Sony STR-DG920 97US, 4 Press ENT/MEM, Signal strength, Aiming the XM Antenna, Listening to the XM Radio, Selecting a preset station

3 Press PRESET + or PRESET – to select a preset number.

30 FM and 30 AM preset numbers are available. If “MEM” disappears before you select the preset number, start again from step 2.

4 Press ENT/MEM.

If SHIFT indicator is light off before you press ENT/MEM, press SHIFT.

You can also use MEMORY/ENTER on the receiver.

The station is stored as the selected preset number.

If “MEM” disappears before you press ENT/MEM, start again from step 2.

5 Repeat steps 1 to 4 to preset another station.Selecting a preset station

1Press TUNER repeatedly to select the FM or AM band.

2Press PRESET+ or PRESET – repeatedly to select the preset station you want.

You can also press SHIFT, then press

numeric buttons to select the preset station you want. Then, press to enter the selection.

You can also press TUNING MODE on the receiver repeatedly to select “PRESET” then use TUNING +/– to select the preset stations you want.

Listening to the XM Radio

For details on XM Radio service, refer to “Listening to the XM Radio” (page 65) in “Tuner Operations”.

Aiming the XM Antenna

You can use “XM ANT AIM” in the Tuner settings menu to help you aim the antenna for optimal signal reception.

1Press XM to select “XM RADIO”.

You can also use INPUT SELECTOR on the receiver.

2Press AMP.

3Press MENU.

4Press V/v repeatedly to select “<TUNER>”.

5Press or b to enter the menu.

6Press V/v repeatedly to select “XM ANT AIM”.

7Press or b to enter the parameter.

8While checking the parameter, aim your antenna to where the best reception will be received.

For details on the parameter, see “Signal strength” below.

Signal strength
Signal	Signal type
			Other
strength
	Satellite	Terrestrial
Good	S : 3	T : 3	Operations
Marginal	S : 2	T : 2
Weak	S : 1	T : 1
None	S : 0	T : 0

continued

97US