Sony STR-DG920 Presetting XM Radio channels, 98US, 4 Press ENT/MEM, Checking the XM Radio ID, 2 Press SHIFT, then press ENT/MEM, Displaying the XM Radio information

Checking the XM Radio ID

1Press XM to select “XM RADIO”.

You can also use INPUT SELECTOR on the receiver.

2Press TUNING + or TUNING – to select channel 0.

You can also press TUNING MODE on the receiver to select “AUTO”, then turn TUNING +/– to select channel 0.

3Check the XM ID on the display and write it in the space provided here. ID:________________________________

Selecting channels from a category (CATEGORY TUNING)

1Press XM to select “XM RADIO”.

You can also use INPUT SELECTOR on the receiver.

2Press CATEGORY MODE repeatedly to select “ONE CAT”.

•ALL CAT: You can select a channel from all the categories. The initial setting is “ALL CAT”,

•ONE CAT: You can select a channel from one category. “CAT” is lights up on the display when you set to “ONE CAT” mode.

3Press CATEGORY + or CATEGORY – to select the category you want.

The category is selected and the channel with the lowest number in the specified category is selected.

4Press TUNING + or TUNING – to select the channel.

You can also press TUNING MODE on the receiver to select “AUTO”, then turn TUNING +/– to select the channel.

Selecting a channel number directly (Direct tuning)

1After selecting XM Radio, press D.TUNING.

2Press SHIFT, then press numeric buttons to enter the channel number.

3Press .

Displaying the XM Radio information

Press DISPLAY repeatedly.

Each time you press DISPLAY while tuning in the channel, the display changes cyclically as follows:

Channel name t Channel number t Category name t Artist name/Feature t Song/Program title t Signal Strength t Sound field type t Volume

Presetting XM Radio channels1 Select a channel you want to preset.

For details on this operation, refer to “Selecting channels from a category (CATEGORY TUNING)” (page 98).

2 Press SHIFT, then press ENT/MEM.

You can also use MEMORY/ENTER on the receiver.

“MEM” lights up on the display.

3 Press PRESET + or PRESET – to select a preset number.

You can also select the number by pressing SHIFT, then numeric buttons. Preset numbers from 1 to 30 are available. Channel 1 is preset for the preset numbers when you purchase the receiver.

4 Press ENT/MEM.

If SHIFT indicator is light off before you press ENT/MEM, press SHIFT.

You can also use MEMORY/ENTER on the receiver.

“MEM” lights off.

5 Repeat steps 1 to 4 to preset another channel.

98US