Sony STR-DG920 Note, Notes, Notes, 100US, 4 Press ENT/MEM, To cancel programming, To activate the input after programming, 5 Repeat steps 1 to 4 to control other components

3 Press numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control.

See the tables on page 101–103 for information on the numeric code(s).

Note

For a TV remote code value, only numbers in the 500’s are valid.

4 Press ENT/MEM.

Once the numeric code has been verified, the RM SET UP indicator slowly flashes twice and the remote automatically exits the programming mode.

5 Repeat steps 1 to 4 to control other components.

Notes

•The indicator turns off while a valid button is pressed.

•In step 2, if you press TUNER, you can only program the button to control a tuner (page 103).

•In step 2, if you want to change to other input, press SHIFT and then press the new input button you want.

•For the numeric codes, only the last three numbers entered are valid.To cancel programming

Press RM SET UP during any step. The RM SET UP indicator flashes 5 times in quick succession. The remote automatically exits the programming mode.

To activate the input after programmingPress the programmed button to activate the input you want.

If programming is unsuccessful, check the following:

•If the indicator does not light up in step 1, the batteries are weak. Replace both batteries.

•If the indicator flashes 5 times in quick succession while entering the numeric code, an error has occurred. Start again from step 1.

The numeric codes corresponding to the component and the maker of the component

Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one numeric code may be assigned to a component. If you fail to program your remote using one of the codes, try using other codes.

Notes

•The numeric codes are based on the latest information available for each brand. There is a chance, however, that your component will not respond to some or all of the codes.

•All of the input buttons on this remote may not be available when used with your particular component.

100US