Sony STR-DG920 PL, etc, PXM, SEQ, RES, JCAT, SP B, OMEM, Name, MSTR, used, 86US, KSP A, SLEEP, Q; PL, PLIIx, ULPCM, XHDMI, SP A+B, MTuner, ; PLII, RNEO:6, DTS-HD, DMPORT

Name Function

ID.RANGE Lights up when dynamic range compression is activated.

JCAT	Lights up when category mode is
	selected during the XM Radio
	operation.
KSP A/	Lights up according to the
SP B/	speaker system used (page 39).
SP A+B	However, these indicators do not
	light up if the speaker output is
	turned off or if headphones are
	connected.

LSLEEP Lights up when the Sleep Timer is activated.

MTuner	Lights up when using the
indicators	receiver to tune in radio stations,
	etc.

NA.DIRECT Lights up when ANALOG DIRECT is selected.

OMEM	Lights up when a memory
	function, such as Preset
	Memory, etc., is activated.
PXM	Lights up when XM Mini-Tuner
	and Home Dock are connected
	and “XM” is selected.
Q; PL/	“; PL” lights up when the
; PLII/	receiver applies Dolby Pro Logic

;PLIIx processing to 2 channel signals in order to output the center and surround channel signals.

“; PLII” lights up when the Dolby Pro Logic II decoder is activated.“; PL IIx” lights up when the Dolby Pro Logic IIx decoder is activated.

However, these indicators do not light up if both the center and surround speakers are not connected and you select a sound field using the A.F.D. button.

Note

Dolby Pro Logic IIx decoding does not function for signals with a sampling frequency of more than 48 kHz.

Name	Function
RNEO:6	Lights up when DTS Neo:6
	Cinema/Music decoder is
	activated.
SEQ	Lights up when the equalizer is
	activated.

TDTS-HD“DTS-HD MSTR” lights up

MSTR/	when the receiver is decoding
DTS-HD HI	DTS-HD Master Audio signals.
RES	“DTS-HD HI RES” lights up
	when the receiver is decoding
	DTS-HD Hi-Resolution
	signals.
ULPCM	Lights up when Linear PCM
	signals is received.
VANALOG	Lights up when
	– INPUT MODE is set to
	“AUTO” and no digital signal
	is being input through the
	COAXIAL, OPTICAL or
	HDMI jacks.
	– INPUT MODE is set to
	“ANALOG”.
	– the “Analog Direct” is being
	used.

WDMPORT Lights up when DIGITAL MEDIA PORT adapter is connected and “DMPORT” is selected.

XHDMI	Lights up when the receiver
	recognizes a component
	connected via a HDMI IN jack.

86US