Selecting a sound field type

For details on each sound field type, see “Enjoying a pre-programmed sound field” (page 50).

Press 2CH/A.DIRECT, A.F.D., MOVIE, or MUSIC repeatedly.The selected sound field type appears on the display.

To select Enhanced Surround Mode

1Press AMP.2Press MENU.3Press V/v repeatedly to select “<SURROUND>”, then press or b.4Press V/v repeatedly to select “E.SUR MODE”, then press or b.

5Press V/v repeatedly to select the enhanced surround sound you want, then press .

Note

The selected Enhanced Surround Mode can only be applied if you have selected “E.SURROUND” by pressing A.F.D. repeatedly.

Listening to the sound without any adjustment (ANALOG DIRECT)Press 2CH/A.DIRECT repeatedly to select “A. DIRECT”.
Listening to the FM/AM radioFor details on the tuner function, see “Tuner Operations” (page 62).Tuning radio stations1Press TUNER repeatedly to select the FM or AM band.

You can also use INPUT SELECTOR on the receiver.

2Press TUNING + or TUNING –.

Press TUNING + to scan from low to high frequencies, press TUNING – to scan from high to low frequencies. The receiver stops scanning whenever a station is received.

You can also press TUNING MODE on the receiver to select “AUTO”, and then turn TUNING +/– to select stations.

Selecting a frequency directly (Direct Tuning)1After selecting the FM or AM band, press D.TUNING.2Press SHIFT, then press numeric buttons to enter the frequency.

3Press .

Presetting radio stations

1 Tune in the station that you want to preset.For details on the operation, refer to “Tuning radio stations”.2 Press SHIFT, then press ENT/MEM.You can also use MEMORY/ENTER on the receiver.

“MEM” lights up for a few seconds. Perform steps 3 and 4 before “MEM” disappears.

96US