Sony STR-DG920 4 Press V/v repeatedly to select “Test Tone”, then press or b, Making settings with the Test Tone menu, or b, Tips, 59US, Speakers, then press, then press

5 Press V/v repeatedly to select the speaker pattern you want.

4 Press V/v repeatedly to select “Test Tone”, then press or b.

Making settings with the Test Tone menu

CLEAR/>10
XM
2CH/	A.F.D.	MOVIE	MUSIC
A.DIRECT
RESOLUTION	INPUT	SLEEP	NIGHT
	MODE		MODE
DISPLAY			GUI	1
			MODE
				2-6
O
RETURN/	HOME		OPTIONS
EXIT	MENU		TOOLS	MENU

1 Press GUI MODE.

“GUI MODE” appears on the display and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen.

2 Press V/v repeatedly to select

“Settings”, then press or b.

The Settings menu list appears on the TV screen.

3 Press V/v repeatedly to select “Speaker”, then press or b.

You can select the test tone type.

5 Press V/v repeatedly to select
the speaker you want to adjust,
then press	.	Advanced
The test tone is output from each speaker
in sequence.
6 Adjust the parameter using V/v,		Speakers
• To adjust the level of all speakers at the same
then press	.
Tips		Setting
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value is shown on the TV screen
during adjustment.		Up

When a test tone is not output from the speakers

•The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly.

•The speaker cords may have the short-circuit problem.

When a test tone is output from a different speaker than the speaker displayed on the TV screen

The speaker pattern to the connected speaker is not set up correctly. Make sure the speaker connection and the speaker pattern match.

59US