Sony STR-DG920 Naming inputs, Switching between digital and analog audio, (INPUT MODE), 81US, xAUTO, Notes, xANALOG, • Inputs, (page 39), (page 44), (page 64), Press OPTIONS

Naming inputs

You can enter a name of up to 8 characters for inputs and display it.

This is convenient for labeling the jacks with the names of the connected components.

1 Choose the item you want to create an index name for. You can name the following items.

• Auto calibration position (page 39)

• Inputs (page 44)

• Preset stations (page 64)

2 Press OPTIONS.

3 Select “Name Input”, then press .

4 Press V/v/B/b to select a character, then press .The name you entered is registered.To cancel naming input

Press RETURN/EXIT O.

Switching between digital and analog audio

(INPUT MODE)

When you connect components to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch.

1 Press the input button.You can also use the INPUT SELECTOR on the receiver.2 Press INPUT MODE repeatedly to select the audio input mode.The selected audio input mode appears on the display.Audio input modesxAUTO

Gives priority to digital audio signals when there are both digital and analog connections. If there are more than one digital connection, HDMI audio signals have priority over COAXIAL and OPTICAL audio signals.

If there are no digital audio signals, analog audio signals are selected.xANALOGSpecifies the analog audio signals input to the AUDIO IN (L/R) jacks.

Notes

•Some audio input modes may not be set up depending on the input.

•When either XM or DMPORT input is selected, “------” appears on the display, and you cannot select other modes. Select an input mode other than the XM and DMPORT input, then set the audio input mode.

•When “Analog Direct” is being used, or the multi channel input is selected, audio input is automatically set to “ANALOG”. You cannot select other modes.

81US

Operations Other