Sony STR-DG920 Off, Item, Save, Exit, flat, 42US, Retry, again, Phase, Level, Front, phase), to off, process, Warning, speaker, Distance, Engineer, (page 43), Parameter

Confirming/saving the measurement results1 Confirm the measurement result.When the measurement ends, a beep sounds.2 Press V/v to select the item you want, then press .

Item	Explanation
Retry	Performs the Auto Calibration
	again.
Save	Saves the measurement
	results and exits the setting
	process.
Warning	Displays warning concerning
	the measurement results. See
	“Message list after Auto
	Calibration measurement”
	(page 43).
Phase*	Displays the phase of each
	speaker (in phase/out of
	phase).
Distance	Displays the measurement
	result for speaker distance.
Level	Displays the measurement
	result for speaker level.
Exit	Exits the setting process
	without saving the
	measurement results.

*When the speaker(s) is (are) out of the phase, “OUT” is displayed on the TV screen. The “+” and “–” terminals of the speaker may be connected the other way around.

However, depending on the speakers, “OUT” appears on the TV screen even though the speakers are connected properly. This is because of the speakers’ specifications. In this case, you can continue to use the receiver.

3 Select “Save” in step 2 to save the measurement result.4 Press V/v repeatedly to select the Auto Calibration Type, then press .

Parameter	Explanation
Full Flat	Makes the measurement of
	frequency from each speaker
	flat.
Engineer	Sets the frequency
	characteristics to a set that
	matches that of the Sony
	listening room standard.
Front	Adjusts the characteristics of
Reference	all the speakers to match the
	characteristics of the front
	speaker.
Off	Sets the Auto Calibration EQ
	to off.

42US