Sony STR-DG920 Test Tone menu parameters, Other parameters of Speaker settings menu, OFF, •OFF, •MAX, •STD, AUTO, •OFF, Tips, 60US, • OFF, • OFF, •AUTO, • AUTO, xTest Tone

Test Tone menu parametersxTest Tone• OFF• AUTOThe test tone is output from each speaker in sequence.

• FL, CNT, FR, SR, SBR, SBL, SB, SL, SW You can select which speakers will output the test tone.

xPhase Noise•OFF

•FL/FR, FL/CNT, CNT/FR, FR/SL, FR/SR, SR/SL, SR/SBR, SBR/SBL, SR/SB, SBL/SL, SB/SL, SL/FL, FL/SR

Lets you output the test tone sequentially from adjacent speakers.

Some items may not be displayed, depending on the setting of the speaker pattern.

xPhase Audio

• OFF

• FL/FR, FL/CNT, CNT/FR, FR/SL, FR/SR, SR/SL, SR/SBR, SBR/SBL, SR/SB, SBL/SL, SB/SL, SL/FL, FL/SR

Lets you output front 2 channel source sound (instead of the test tone) sequentially from adjacent speakers.

Some items may not be displayed, depending on the setting of the speaker pattern.

Other parameters of Speaker settings menuxCrossover Freq(Speaker crossover frequency)

Lets you set the bass crossover frequency of speakers that has been set to “SMALL” in the Speaker settings menu. Measured speaker crossover frequency is set for each speaker after the Auto Calibration.

The adjusted value is set for each speaker when you adjust the speaker crossover frequency using “Crossover Freq” after the Auto Calibration.

xD.Range Comp(Dynamic range compressor)

Lets you compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only.

•MAXThe dynamic range is compressed dramatically.•STDThe dynamic range is compressed as intended by the recording engineer.

•AUTO

The dynamic range is applied automatically with Dolby TrueHD source or other source is set to “OFF”.

•OFF

The dynamic range is not compressed.

Tips

•Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal.

•“STD” is the standard setting, but it only enacts light compression. Therefore, we recommend using the “MAX” setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression.

60US