Sony STR-DG920 Performing Auto Calibration, Tip, 41US, Started Getting, 1 Press GUI MODE, 7 Measurement starts, –Connect the headphones, –Change the volume level

Performing Auto Calibration

XM
2CH/	A.F.D.	MOVIE	MUSIC
A.DIRECT
	INPUT	SLEEP	NIGHT
RESOLUTION MODE			MODE
DISPLAY			GUI	1
			MODE
				2-5
O
RETURN/	HOME		OPTIONS
EXIT	MENU		TOOLS	MENU

1 Press GUI MODE.

“GUI MODE” appears on the display and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen.

2 Press V/v repeatedly to select “Settings”, then press or b.The Settings menu list appears on the TV screen.3 Press V/v repeatedly to select “Auto Calibration”, then press or b.4 Press V/v repeatedly to select “Auto Calibration Start”, then press or b.5 Press to select “START”.

6 The measurement starts in five seconds.

Started Getting

7 Measurement starts.

The measurement process will take approximately 30 seconds with a test tone. Wait until the measurement process completes.

Tip

The measurements may not be performed correctly or Auto Calibration cannot be performed when special speakers, such as dipole speakers are used.

To cancel the measurementThe measurement will be canceled when you do the following:–Press ?/1, input buttons or MUTING.–Press SPEAKERS (OFF/A/B/A+B) on the receiver.–Change the volume level.–Connect the headphones.

41US