Sony STR-DG920 9:Calibrating the appropriate speaker settings automatically, 8:Selecting the speaker system, (Auto Calibration), Note, 39US, Light up, To select

8:Selecting the speaker systemYou can select the front speakers you want to drive.

Be sure to use the buttons on the receiver for this operation.

SPEAKERS (OFF/A/B/A+B)

POWER

								MASTER VOLUME
TONE MODE		TUNING MODE					DISPLAY	INPUT MODE
				MULTI CHANNEL DECODING
TONE		TUNING					INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
		MEMORY/	DIMMER	2CH/	A.F.D.	MOVIE	MUSIC
		ENTER		A.DIRECT
VIDEO 2 IN/PORTABLE AV IN
PHONES
VIDEO	L AUDIO R	AUTO CAL MIC

Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the front speaker system you want to drive.

To select	Light up
The speakers connected to the	SP A
SPEAKERS FRONT A terminals
The speakers connected to the	SP B
SPEAKERS FRONT B terminals
The speakers connected to both the	SP A + B
SPEAKERS FRONT A and B
terminals (parallel connection)

To turn off the speaker output

Press SPEAKERS (OFF/A/B/A+B) repeatedly until the “SP A”, “SP B” and “SP A + B” indicators on the display do not light up. “ALL OFF” appears on the display for a while.

No audio signals are output from any speaker terminals.

Note

You cannot switch the front speaker system by pressing SPEAKERS (OFF/A/B/A+B) when the headphones are connected.

9:Calibrating the appropriate speaker settings automatically

(Auto Calibration)

This receiver is equipped with DCAC (Digital Cinema Auto Calibration) function which allows you to perform automatic calibration as follows:

•Check the connection between each speaker and the receiver.a)•Adjust the speaker level.•Measure the distance of each speaker to your listening position.a)•Measure the speaker polarity.•Measure the speaker size.a)•Measure the frequency characteristics.a)b)

a)The measurement result is not utilized in the following case.

–“Analog Direct” is being used.

–The multi channel input is selected.

b)The measurement result is not utilized in the following case.

–Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received.

–PCM signals with a sampling frequency of more than 96 kHz are being received.

The DCAC is designed to obtain proper sound balance in your room. However, you can adjust the speaker levels and balance manually according to your preference. For details, see “Making settings with the Test Tone menu” (page 59).

39US

Started Getting