Turn-Nado®Gearhead Lathes

P R E P A R A T I O N

For Machines Mfg. Since 3/11

Power Supply

Requirements

Availability

Before installing the machine, consider the availability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed.

To minimize the risk of electrocution, fire, or equipment damage, installation work and electrical wiring must be done by an electrician or qualified service personnel in accordance with all applicable codes.

Serious injury could occur if you connect the machine to power before completing the setup process. DO NOT connect to power until instructed later in this manual.

Full-Load Current Rating

The full-load current rating is the amperage a machine draws at 100% of the rated output power. On machines with multiple motors, this is the amperage drawn by the largest motor or sum of all motors and electrical devices that might operate at one time during normal operations.

SB1046PF Full-Load Rating

19.23 Amps

SB1047PF Full-Load Rating

19.23 Amps

SB1048PF Full-Load Rating

19.23 Amps

SB1056F Full-Load Rating

19.23 Amps

SB1057F Full-Load Rating

19.23 Amps

SB1058F Full-Load Rating

19.23 Amps

For your own safety and protection of property, consult an electrician if you are unsure about wiring practices or applicable electrical codes.

The full-load current is not the maximum amount of amps that the machine will draw. If the machine is overloaded, it will draw additional amps beyond the full-load rating.

If the machine is overloaded for a sufficient length of time, damage, overheating, or fire may result—especially if connected to an undersized circuit. To reduce the risk of these hazards, avoid overloading the machine during operation and make sure it is connected to a power supply circuit that meets the requirements in the following section.

Circuit Requirements

This machine is prewired to operate on a 440V power supply circuit that has a verified ground and meets the following requirements:

Nominal Voltage

440V/480V

Cycle

60 Hz

Phase

3-Phase

Circuit Rating

30 Amps

Connection... Hardwire with Locking Switch

A power supply circuit includes all electrical equipment between the main breaker box or fuse panel in your building and the incoming power connections inside the machine. This circuit must be safely sized to handle the full-load current that may be drawn from the machine for an extended period of time. (If this machine is

Note: The circuit requirements in this manual are for a dedicated circuit—where only one machine will be running at a time. If this machine will be connected to a shared circuit where multiple machines will be running at the same time, consult a qualified electrician to ensure the circuit is properly sized.

-22-

Page 24
Image 24
Southbend SB1046PF owner manual Power Supply Requirements, Availability, Full-Load Current Rating, Circuit Requirements

SB1046PF specifications

The Southbend SB1046PF is a popular choice among culinary professionals and passionate enthusiasts alike. This heavy-duty gas range is designed to meet the demanding needs of busy kitchens, providing exceptional performance and reliability. Ideal for restaurants and catering services, the SB1046PF is equipped with features that promote efficiency and ease of use.

One of the standout features of the Southbend SB1046PF is its robust construction. Built with a stainless steel exterior and a welded frame, this range is designed for longevity and durability. The high-quality materials resist scratches and corrosion, making it not only functional but also aesthetically pleasing for any kitchen environment.

The SB1046PF comes with six powerful burners, each with a total output of 32,000 BTUs. This ensures a rapid boil and consistent heat distribution, allowing chefs to cook multiple dishes simultaneously. The burners are equipped with lift-off heads for easy cleaning, further enhancing the unit's usability in a fast-paced kitchen.

Adding to its versatility, the Southbend SB1046PF features an integrated standard oven, which offers even more cooking options. The oven has a total BTU rating of 35,000, providing ample heat for baking, roasting, or braising. It features a porcelain enamel interior, which helps simplify cleaning, while the oven door is designed with a cool-to-touch, ergonomic handle for safe operation.

The oven’s capabilities are complemented by a variety of cooking technologies. The SB1046PF includes a flame failure safety device to prevent gas leaks, ensuring a safe cooking environment. Additionally, the range's powered convection system allows for better heat circulation, resulting in perfectly cooked food each time.

Another notable characteristic of the Southbend SB1046PF is its user-friendly controls. The intuitive thermostatic controls provide precise temperature management, enabling chefs to execute their recipes accurately. Furthermore, the unit is designed for easy installation, fitting seamlessly into standard kitchen layouts.

In conclusion, the Southbend SB1046PF is a commercially designed gas range that combines robust features with advanced cooking technologies. Its solid construction, powerful burners, efficient oven, and safety features make it an excellent choice for any high-demand kitchen, ensuring that culinary professionals have the tools they need to create exceptional dishes consistently.