Manuals / Southbend / Power Tools / Lathe

Southbend SB1046PF Half Nut Adjustment, Belts, To adjust the half nut, To adjust the V-belts

Models: SB1046PF

1 140
Download 140 pages 44.21 Kb
Page 82
Image 82

Turn-Nado®Gearhead Lathes

S E R V I C E

For Machines Mfg. Since 3/11

Half Nut Adjustment

The clamping pressure of the half nut is fully adjustable with a gib that can be loosened or tightened by two set screws. Use this procedure to adjust the half nut if it becomes loose from wear, or it is too tight for your preferences. A half nut that is too loose will make it difficult to produce accurate work. A half nut that is too tight will increase the rate of wear on itself and the leadscrew.

V-Belts

V-belts stretch and wear with use, so check the tension on a monthly basis to ensure optimal power transmission. Replace all of the V-belts as a matched set if any of them show signs of glazing, fraying, or cracking.

Tools Needed:

Qty

Phillips Screwdriver #2

1

Open End Wrench 24mm

1

Tool Needed:

Qty

Hex Wrench 3mm

.................................................. 1

To adjust the half nut:

1.Disengage the half nut, then remove the thread dial.

2.Turn the two set screws (see Figure 119) clockwise to tighten the half nut and counterclockwise to loosen it.

Make sure to turn the set screws in even amounts so that one end of the gib does not become tighter than the other.

Set

Screws

To adjust the V-belts:

1.DISCONNECT LATHE FROM POWER!

2.Remove the motor access covers shown in Figure 120.

Headstock

End

Access

Covers

Figure 120. Locations of motor access covers.

3.Adjust the hex nuts on the motor mount bolts shown in Figure 121 to move the motor mount plate up or down and adjust the V-belt tension. When correctly tensioned, each belt should have about 3⁄4" deflection when pressed firmly (see Figure 121).

Figure 119. Half nut gib adjustment.

3. Engage/disengage the half nut several times

and notice how it feels. The half nut is

correctly adjusted when it has a slight drag

while opening and closing. The movement

should not be too stiff or too sloppy.

Motor Mount Bolts

Pulley

Deflection

Pulley

4.

Repeat Steps 2–3, if necessary, until you are

 

satisfied with the half nut pressure.

5.

Re-install the thread dial.

Figure 121. V-belt adjustment.

4.Tighten the hex nuts against both sides of the motor mount plate to prevent it from moving out of adjustment during operation, then re-install the access covers.

-80-

Page 81 Page 83
Page 82
Image 82
Southbend SB1046PF Half Nut Adjustment, Belts, To adjust the half nut, To adjust the V-belts, Pulley Deflection
Page 81 Page 83

SB1046PF specifications

The Southbend SB1046PF is a popular choice among culinary professionals and passionate enthusiasts alike. This heavy-duty gas range is designed to meet the demanding needs of busy kitchens, providing exceptional performance and reliability. Ideal for restaurants and catering services, the SB1046PF is equipped with features that promote efficiency and ease of use.

One of the standout features of the Southbend SB1046PF is its robust construction. Built with a stainless steel exterior and a welded frame, this range is designed for longevity and durability. The high-quality materials resist scratches and corrosion, making it not only functional but also aesthetically pleasing for any kitchen environment.

The SB1046PF comes with six powerful burners, each with a total output of 32,000 BTUs. This ensures a rapid boil and consistent heat distribution, allowing chefs to cook multiple dishes simultaneously. The burners are equipped with lift-off heads for easy cleaning, further enhancing the unit's usability in a fast-paced kitchen.

Adding to its versatility, the Southbend SB1046PF features an integrated standard oven, which offers even more cooking options. The oven has a total BTU rating of 35,000, providing ample heat for baking, roasting, or braising. It features a porcelain enamel interior, which helps simplify cleaning, while the oven door is designed with a cool-to-touch, ergonomic handle for safe operation.

The oven’s capabilities are complemented by a variety of cooking technologies. The SB1046PF includes a flame failure safety device to prevent gas leaks, ensuring a safe cooking environment. Additionally, the range's powered convection system allows for better heat circulation, resulting in perfectly cooked food each time.

Another notable characteristic of the Southbend SB1046PF is its user-friendly controls. The intuitive thermostatic controls provide precise temperature management, enabling chefs to execute their recipes accurately. Furthermore, the unit is designed for easy installation, fitting seamlessly into standard kitchen layouts.

In conclusion, the Southbend SB1046PF is a commercially designed gas range that combines robust features with advanced cooking technologies. Its solid construction, powerful burners, efficient oven, and safety features make it an excellent choice for any high-demand kitchen, ensuring that culinary professionals have the tools they need to create exceptional dishes consistently.