Turn-Nado®Gearhead Lathes

O P E R A T I O N

For Machines Mfg. Since 3/11

Chuck Installation

To ensure accurate work, it is extremely important to make sure the spindle nose and chuck mating surfaces/tapers are clean. Even a small amount of lint or debris can affect accuracy.

The chuck is properly installed when all camlocks are tight, the spindle and chuck tapers firmly lock together, and the back of chuck is firmly seated against the face of the spindle all the way around—without any gaps.

To install the chuck:

1.DISCONNECT LATHE FROM POWER!

2.Use an appropriate lifting, support, or protective device to protect the ways and support the chuck during the installation process.

3.Clean and lightly oil the camlock studs, then thoroughly clean the mating surfaces of the spindle and chuck.

4.Install the chuck by inserting the camlock studs straight into the spindle cam holes.

Important: Avoid inserting the studs by pivoting them in from an angle or rotating the spindle. This can damage studs or spindle cam holes.

CORRECT

INCORRECT

Figure 31. Inserting camlock studs into spindle cam

holes.

5.Incrementally tighten the camlocks in a criss-cross or star pattern to ensure that the chuck seats evenly against the spindle.

6.When the chuck is fully seated and all the camlocks are tight, verify that the cam line is between the two "V" marks on the spindle nose, as shown in the following figure.

Cam line between “V”s

Figure 32. Cam line positioned between the "V" marks

after the camlocks are fully tightened.

If the cam line is NOT between the "V" marks when the camlock is tight, the stud may be installed at the incorrect height. To fix this, adjust the stud height as shown in the following figure. Make sure to re-install the stud cap screw afterward.

If adjusting the stud height does not correct the problem, try swapping stud positions on the chuck.

INCORRECT

INCORRECT

Stud Too High:

Stud Too Low:

Turn In

Turn Out

One-Turn

One-Turn

Figure 33. Correcting an improperly installed stud.

-38-

Page 40
Image 40
Southbend SB1046PF owner manual Chuck Installation, To install the chuck

SB1046PF specifications

The Southbend SB1046PF is a popular choice among culinary professionals and passionate enthusiasts alike. This heavy-duty gas range is designed to meet the demanding needs of busy kitchens, providing exceptional performance and reliability. Ideal for restaurants and catering services, the SB1046PF is equipped with features that promote efficiency and ease of use.

One of the standout features of the Southbend SB1046PF is its robust construction. Built with a stainless steel exterior and a welded frame, this range is designed for longevity and durability. The high-quality materials resist scratches and corrosion, making it not only functional but also aesthetically pleasing for any kitchen environment.

The SB1046PF comes with six powerful burners, each with a total output of 32,000 BTUs. This ensures a rapid boil and consistent heat distribution, allowing chefs to cook multiple dishes simultaneously. The burners are equipped with lift-off heads for easy cleaning, further enhancing the unit's usability in a fast-paced kitchen.

Adding to its versatility, the Southbend SB1046PF features an integrated standard oven, which offers even more cooking options. The oven has a total BTU rating of 35,000, providing ample heat for baking, roasting, or braising. It features a porcelain enamel interior, which helps simplify cleaning, while the oven door is designed with a cool-to-touch, ergonomic handle for safe operation.

The oven’s capabilities are complemented by a variety of cooking technologies. The SB1046PF includes a flame failure safety device to prevent gas leaks, ensuring a safe cooking environment. Additionally, the range's powered convection system allows for better heat circulation, resulting in perfectly cooked food each time.

Another notable characteristic of the Southbend SB1046PF is its user-friendly controls. The intuitive thermostatic controls provide precise temperature management, enabling chefs to execute their recipes accurately. Furthermore, the unit is designed for easy installation, fitting seamlessly into standard kitchen layouts.

In conclusion, the Southbend SB1046PF is a commercially designed gas range that combines robust features with advanced cooking technologies. Its solid construction, powerful burners, efficient oven, and safety features make it an excellent choice for any high-demand kitchen, ensuring that culinary professionals have the tools they need to create exceptional dishes consistently.