Manuals / Southbend / Power Tools / Lathe

Southbend SB1046PF owner manual E P a R a T I O N

Models: SB1046PF

1 140
Download 140 pages 44.21 Kb
Page 36
Image 36

Turn-Nado®Gearhead Lathes

P R E P A R A T I O N

For Machines Mfg. Since 3/11

Note: The spindle clutch is tight when new and may require moderate pressure on the spindle lever to engage it until it is broken in.

13.Move the spindle lever down to start the spindle rotating counterclockwise (down toward the front of the lathe).

—If the spindle rotates in the opposite direction (clockwise), the power supply phase polarity may be incorrect. Refer to Correcting Phase Polarity on Page 92 to resolve this.

14.Observe the lathe and listen for any abnormal noises or vibration. The lathe should run smoothly.

15.Move the spindle lever to the OFF (middle) position, let the spindle come to a complete stop, then move the lever up to reverse spindle rotation.

16.Push the STOP button. The spindle should come to a slow stop.

17.With the STOP button pushed in, attempt to start spindle rotation—the spindle should not start.

—If the spindle does start, the STOP button is not working properly. This safety feature must operate properly before continuing. Turn the master power switch OFF, disconnect the lathe from power, then call Tech Support for help.

18.Move the spindle lever to the OFF (middle) position, reset the STOP button by twisting it clockwise until it pops out, push the spindle motor ON button, then restart spindle rotation by moving the spindle lever down again.

19.Press the foot brake. The spindle should come to a quick stop.

—If the foot brake has no effect on the stopping speed of the spindle, push the STOP button to stop the lathe, disconnect it from power, and call Tech Support for help.

20.Push the STOP button to prevent an accidental start-up.

21.Remove the end gear cover from the left side of the headstock. There is a safety switch that prevents the spindle from starting while this cover is removed.

22.Reset the STOP button, push the spindle motor ON button, stand away from all the exposed gears on the side of the headstock, then attempt to start spindle rotation—the spindle should not start.

—If the spindle does start with the end gear cover removed, the safety limit switch is not adjusted or operating correctly. This safety feature must operate properly before continuing. Press the STOP button to turn the lathe OFF, disconnect it from power, and call Tech Support for help.

23.Push the STOP button in, move the spindle lever to the OFF (middle) position, push the spindle motor OFF button and wait for the V-belts to stop, then replace the end gear cover.

24.Reset the STOP button, press the spindle motor ON button, then lift the chuck guard up—this will activate the chuck guard safety switch to prevent spindle rotation. Attempt to start spindle rotation—the spindle should not start.

—If the spindle does start with the chuck guard in the up position, the safety switch is not adjusted or operating correctly. This safety feature must operate properly before continuing. Press the STOP button to turn the lathe OFF, disconnect it from power, and call Tech Support for help.

25.Move the chuck guard back down into operating position.

26.Point the coolant nozzle down into the chip drawer and verify that there is coolant in the reservoir (refer to Coolant System Service on Page 74 for detailed instructions).

-34-

Page 35 Page 37
Page 36
Image 36
Southbend SB1046PF owner manual E P a R a T I O N
Page 35 Page 37

SB1046PF specifications

The Southbend SB1046PF is a popular choice among culinary professionals and passionate enthusiasts alike. This heavy-duty gas range is designed to meet the demanding needs of busy kitchens, providing exceptional performance and reliability. Ideal for restaurants and catering services, the SB1046PF is equipped with features that promote efficiency and ease of use.

One of the standout features of the Southbend SB1046PF is its robust construction. Built with a stainless steel exterior and a welded frame, this range is designed for longevity and durability. The high-quality materials resist scratches and corrosion, making it not only functional but also aesthetically pleasing for any kitchen environment.

The SB1046PF comes with six powerful burners, each with a total output of 32,000 BTUs. This ensures a rapid boil and consistent heat distribution, allowing chefs to cook multiple dishes simultaneously. The burners are equipped with lift-off heads for easy cleaning, further enhancing the unit's usability in a fast-paced kitchen.

Adding to its versatility, the Southbend SB1046PF features an integrated standard oven, which offers even more cooking options. The oven has a total BTU rating of 35,000, providing ample heat for baking, roasting, or braising. It features a porcelain enamel interior, which helps simplify cleaning, while the oven door is designed with a cool-to-touch, ergonomic handle for safe operation.

The oven’s capabilities are complemented by a variety of cooking technologies. The SB1046PF includes a flame failure safety device to prevent gas leaks, ensuring a safe cooking environment. Additionally, the range's powered convection system allows for better heat circulation, resulting in perfectly cooked food each time.

Another notable characteristic of the Southbend SB1046PF is its user-friendly controls. The intuitive thermostatic controls provide precise temperature management, enabling chefs to execute their recipes accurately. Furthermore, the unit is designed for easy installation, fitting seamlessly into standard kitchen layouts.

In conclusion, the Southbend SB1046PF is a commercially designed gas range that combines robust features with advanced cooking technologies. Its solid construction, powerful burners, efficient oven, and safety features make it an excellent choice for any high-demand kitchen, ensuring that culinary professionals have the tools they need to create exceptional dishes consistently.