SOYO SY-5S manual 1st phase, 2nd phase, 101

SiS VGA Driver Installation SY-5STM

Install SiS 5597/5598 OS/2 Warp drivers according to the following procedures:

1st phase:

1.Enter “OS/2 window” or “OS/2 full screen.”

2.Change directory to which holds the SiS 5597/5598 OS/2 3.0 display drivers and type SETUP <Enter>. For example, D:\>SOYO_CD\REV_10\UTILITY\SIS_VGA\OS2\DBCS30\SET UP.

3.All the Driver Files will be copied to a sub-directory C:\SISDRV and an “SiS Install” icon will be created.

4.After completing “setup” program, shutdown and re-boot OS/2.

2nd phase:

5.After re-booting OS/2, double clicks “SiS Install” icon. The “SiS Install” icon would be executed automatically and “Select Screen parameters for SiS SVGA” screen will appeared on the screen.

6.Select the desired resolution (and color) and frame rate on this screen, then click “OK” to complete installation. The “SiS Setup” icon will be created for future change modes and frame rate usage.

7.After completing installation, shutdown and re-boot OS/2 to make your selection effective.

101