SOYO SY-5S manual Autodesk ADI 4.2 Protected Mode, General Description Driver Files, Unpack & Copy

SiS VGA Driver Installation SY-5STM

6-3 Autodesk ADI 4.2 Protected Mode

6-3.1 General Description

Driver Files

1. The enclosed CD-ROM contains the following SiS 5597/5598 ADI file: RCPSIS.EXP SiS ADI driver (for all resolutions &

colors).

Note:

This version of the ADI driver does not support 16-color operation.

2.This driver fits for a series of Autodesk Inc. products including:

ØAutoCAD/386 R11

ØAutoCAD/386 R12

ØAutoShade/386 B2.0

Ø3D Studio V3.0

3.Their installation procedures are different from program to program. The first step of installation is the same for all these programs. Make sure you unpack and copy drivers to where you would like them to reside.

4.A detailed description of the installation procedures for each program is given in Sec. 1.2.2 to Sec. 1.2.5.

Unpack & Copy

To unpack and copy drivers please perform the following procedures:

1.Run “INSTDRV.EXE” where it resides. For example,

D:\>SOYO_CD\REV_10\UTILITY\SIS_VGA\DOS\INSTDRV <Enter> (assuming INSTDRV.EXE resides in CD-ROM “D” )

2.In SiS’ s Super VGA Driver Installation menu, select “A. ADI 4.2” to unpack and copy drivers. (To select, type “A” )

85