SOYO manual SY-5STM

SiS VGA Driver Installation SY-5STM

4.Change your current working directory to \3DS3 (where your 3D Studio V3.0 usually resides).

5.Delete the original configuration file “3DADI.CFG.”

6.Type 3DS VIBCFG <Enter> to configure your display environment.

7.After the “Company Register Screen” appears press <Enter> to continue.

8.The ” Video Environment Configuration Screen” will appear. Please follow the following procedures to configure your video display environment.

l In “Main-Display” item,

ØPress <Enter>. The selection menu will appear.

ØIn selection menu, move cursor to “RCPADI”

ØPress <Enter> to select.

lIn “Material-Display” item,

ØPress <Enter>. The selection menu will appear.

ØIn selection menu, move cursor to “RCPADI”

ØPress <Enter> to select.

lIn “Render-Display” item,

ØPress <Enter>. The selection menu will appear.

ØIn selection menu, move cursor to “RCPADI” or “RDPADI”.

ØPress <Enter> to select.

lComplete the other selections and exit configuration.

9.After the exiting configuration, 3DS will boot automatically using the environment you just selected.

10.If your previous configuration is good, 3DS will ask you to make a detailed configuration for SiS 5597/5598 drivers. If this does not happen, please check your previous configuration.

89