SOYO SY-5S manual IBM OS/2 Warp 3.0 Double Byte Character, Setup.Cmd, Svga.Exe, Others

SiS VGA Driver Installation SY-5STM

6-9 IBM OS/2 Warp 3.0 (Double Byte Character)

OS/2 Version Notes

1.The following description applies to “Double Byte Character IBM OS/2 Warp 3.0” only. (i.e. Chinese, Japanese, Korean etc.)

2.For Single Byte Character Versions IBM OS/2 Warp 3.0 installation, please refer to the next section.

Driver Files

The enclosed SiS 5597/5598 Double Byte OS/2 driver contains the following files:

Ø	SETUP.CMD	Program to install SiS drivers
Ø	SVGA.EXE	SiS PMI generator
Ø	S768256.DL@	SiS IBMDEV32.DLL display driver
Ø	OTHERS	Other files required for installation.

Installation

For Double Byte OS/2 Warp limitation, the installation process is a two-phase installation. The installation cannot be completed in one step process.

Ø1st phase: Copy files, modify “config.sys” , “create “SiS Install” icon , then shutdown and re-boot OS/2.

Ø2nd phase: Double clicks “SiS Install” icon to complete the installation.

Before installing SiS 5597/5598 OS/2 drivers, make sure you:

1.Install an OS/2 system using “VGA display” option (i.e. standard VGA).

2.Start your OS/2 system.

100