SOYO SY-5S manual Preparations, What kind of speaker can connect to Line-out port?

Quick Installation Guide SY-5STM

QUICK INSTALLATION GUIDE

Congratulations on your purchase of SY-5STMMainboard. You are

about to install and connect your new mainboard.

Note: Do not unpack the mainboard from its protective anti-static packaging until you have made the following preparations.

PREPARATIONS

Gather and prepare all the following hardware equipment to

complete the installation successfully:

1.Pentium processor with CPU cooling fan.

2.DIMM memory module

3.Computer case and chassis with adequate power supply unit

4.Monitor

5.Keyboard

6.Pointing Device (PS/2 mouse)

7.Speaker(s) (optional)

8.Disk Drives: HDD, CD-ROM, Floppy drive …

9.External Peripherals: Printer, Plotter, and Modem (optional)

10.Internal Peripherals: Modem and LAN cards (optional)

Frequently Asked Questions:

•Do I need to install a VGA card?

•Do I also need to install a sound card?

The answer is NO to both questions above, since, for your convenience, the SY-5STM mainboard already features one built-in VGA port and three built-in audio-stereo ports (Line-in, Line-out, Microphone).

Notice: If you plan on using the onboard VGA and intend to install only one DRAM memory module, then this single DRAM must be installed in bank DIMM1.

•What kind of speaker can connect to "Line-out" port?

This motherboard requires a speaker with built-in amplifier to generate proper output sound volume.

5