SOYO SY-5S manual Ide, IDE Burst Mode IDE Data Port Post Write, IDE HDD Block Mode

BIOS Setup Utility			SY-5STM
3-8.1 IDE Device Controls
IDE Controls	Setting	Description		Note

Internal PCI/IDE

Both	Selects which PCI IDE	Default
Disabled	controller to use.
Primary
Secondary

The following fields may be configured only if [Internal PCI/IDE] is set to [Both], [Primary], or [Secondary].

IDE

ØPrimary Master PIO

ØPrimary Slave PIO

ØSecondary Master PIO

ØSecondary Slave PIO

Mode 0-4 0 is the slowest speed 4 is the fastest speed

Auto For better performance Default and stability, we

suggest you use the Auto setting to set the HDD control timing.

ØPrimary Master UltraDMA

ØPrimary Slave UltraDMA

ØSecondary Master U-DMA

ØSecondary Slave U-DMA

Disabled

Auto	Select Auto to enable	Default
	Ultra DMA Mode
	support.

The following field may be configured only if [Internal PCI/IDE] is set to [Both], [Primary], or [Secondary].

IDE Burst Mode

IDE Data Port Post Write

Disabled

Enabled	Select this option if	Default
	your hard disk support
	this function.
Disabled
Enabled	Select this option if	Default
	your hard disk support
	this function.

IDE HDD Block Mode

Disabled

Enabled Invokes multi-sector Default transfer instead of one sector per transfer. Not

all HDDs support this function.

62