SOYO SY-5S manual System Boot Control Settings Description Gate A20 Option, Memory Parity, Check

BIOS Setup Utility		SY-5STM
System Boot Control Settings (continued)
System Boot	Setting	Description	Note
Control Settings
Gate A20 Option
	Normal
	Fast	Allows RAM access	Default
		above 1MB using the fast
		gate A20 line.
Memory Parity
	Enabled	This allows to perform a	Default
Check		redundancy check on the
		parity bit in the data
		strings. This method is
		used for error detection
		when the parity is not
		found.
	Disabled
3-2.4 Typematic Settings

Typematic Settings

Typematic Rate Setting

Setting	Description	Note
Disabled		Default
Enabled	Enables to adjust the
	keystroke repeat rate.

The following [Typematic Rate] and [Typematic Delay] fields are active only if [Typematic Rate Setting] is set to [Enabled]

Typematic Rate

6(Char/sec)

8(Char/sec)

10(Char/sec)

12(Char/sec)

15(Char/sec)

20(Char/sec)

24(Char/sec)

30(Char/sec)

Choose the rate at which Default a character is repeated

when holding down a key.

Typematic Delay

250(msec)

500(msec)

750(msec) 1000 (msec)

Choose how long after Default you press a key down the character begins

repeating.

46