SOYO SY-5S manual DOS Utility DOSINST.EXE, Avance software copy to C\A3SOUND System bootup drive

ALS120 Audio Driver Installation SY-5STM

5-2 DOS Utility (DOSINST.EXE)

You can also install the ALS120 audio driver by running the DOSINST.EXE application program in DOS environment:

1.Insert the CD Title Disk into diskette drive D (CD-ROM).

2.If Windows 3.1/95 is running, exit the application.

3.At the C:\> prompt, type d: (CD-ROM) and press the <Enter> key.

4.At the D:\SOYO_CD\rev_10\utility\sis_aud\> prompt, type

DOSINST.EXE and press the <Enter> key.

5.The Avance Sound Chip Installation Program screen will be displayed showing the following defaults:

Avance software copy to: C:\A3SOUND

System bootup drive: C:\

•To make changes to the defaults, select the parameter with the Up/Down Arrow keys and press the <Enter> key. Then change the parameter and press the <Enter> key again to accept the changes.

•When satisfied with the new parameters or to accept the defaults, select “accept the above” with the Up/Down Arrow keys and press the <Enter> key.

6.The installation of the Avance Logic software drivers will now begin.

7.When all of the files are copied to the fixed disk, installation program will automatically update the AUTOEXEC.BAT, saving copies of the original files with the extension “.ALS” , and the A3CONFIG.EXE utility will automatically start. Use the instructions given in “Setup Utility Program" in a next section to set up the ALS120 sound card.

77