SOYO SY-5S manual Handling the Mainboard, This Quick Start Guide

Introduction SY-5STM

1-2 UNPACKING THE MAINBOARD

When unpacking the mainboard, check for the following items:

ØThe SY-5STMSiS 5598 PCI Mainboard

ØThis Quick Start Guide *

ØThe Installation CD-ROM *

ØOne IDE Device Flat Cable

ØOne Floppy Disk Drive Flat Cable

ØOne 9-pin External Serial Connector with 9-pin Flat Cable

*If your board comes with a driver disc and a paper manual, the Quick Start Guide and the CD-ROM are not included in the package.

Warning: Do not unpack the mainboard from its anti-static packaging until you are ready to install it.

1-3 HANDLING THE MAINBOARD

To avoid damage to your mainboard, follow these simple rules while unpacking:

ØBefore handling the mainboard, ground yourself by grasping an unpainted portion of the system's metal chassis.

ØRemove the mainboard from its anti-static packaging. Hold the mainboard by the edges and avoid touching its components.

ØCheck the mainboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.

Warning: Do not apply power if the mainboard appears damaged. If there is damage to the board, contact your dealer immediately.

29