SOYO SY-5S manual Enter Password, User Password

BIOS Setup Utility SY-5STM

3.Enter your new password and press [Enter]. The following message appears, prompting to confirm the new password:

Confirm Password:

4.Re-enter your password and then press [Enter] to exit to the Main Menu.

This diagram outlines the password selection procedure:

Type the Password	ROM PCI/ISA BIOS Press <Enter> without
and Press: <Enter>	entering the password
	CMOS SETUP UTILITY

AWARD SOFTWARE,

STANDARD		SETUP
		Enter Password:
BIOS FEATURES SETUP			SUPERVISOR
CHIPSET FEATURES SETUP			USER PASSWORD
Enter Password: ∗ ∗ ∗ ∗ ∗			Password Disabled!!
POWER MANAGEMENT SETUP			IDE HDD AUTO DETECTION
PNP/PCI CONFIGURATION			SAVE & EXIT SETUP
Confirm Password: ∗ ∗ ∗ ∗ ∗
LOAD SETUP DEFAULTS			EXIT WITHOUT SAVING
LOAD BIOS
Esc	: Quit	After you confirm the password,
		press <Esc> to exit
F10	: Save & Exit		Color

Time,Date, Hard Disk Type…

3-10 USER PASSWORD

When the user password option is on, you are not allowed to change any setting in the [CMOS SETUP UTILITY] except for changing the user's password.

The password setting procedure is similar to that for the [SUPERVISOR PASSWORD] (Refer to section 3-9).

67