SSI America 9210 user manual Specification, Display NA Analog outputs isolated Optional

M4557 - Model 9210 Nitriding Controller

2.0SPECIFICATION

2.1Enclosure - NA

2.2Dimensions

Electronics unit: H. 180mm W.85mm D.60mm See figure 1.

2.3Ambient Temperature

Sensor unit: -10…50°C Max

2.4Display - NA

2.4Analog outputs – isolated (Optional)

4…20mAV proportional to 0..100% Hydrogen (minimum load 500 ohm.) Optional

2.5Alarm indicators (Optional)

Voltage free contacts SPDT Relay 1A /120Vac or 2A /240Vac

•High alarm 1 relay (Set to 0.6% Hydrogen)

•High alarm 2 relay (Set to 1.0% Hydrogen)

2.6Communications RS232

Set up: 9600 Baud, 1 start bit, 8 data bits, 1 stop bit, no parity, hardware (CTS/RTS) handshaking. See Appendix 1 for proposed communication protocol.

	DTE male 9w
PIN	NAME
3	TX(out)
2	RX (in)

7RTS (out)

8CTS (in)

5GND

RS485

Optional

SSi Manual SERIES 9210-M4557-Nitriding Page 56 of 56