SSI America 9210 user manual Relay Set Points, Analog Input Setup

M4557 - Model 9210 Nitriding Controller

•Programmer alarm

•Alarm 1

•Alarm 2

•Alarm 3

•Event 0 through Event 15

•Burn off

•IN 1 Relay SP A

•IN 1 Relay SP B

•IN 1 Relay SP C

•IN 2 Relay SP A

•IN 2 Relay SP B

•IN 2 Relay SP C

•IN 3 Relay SP A

•IN 3 Relay SP B

•IN 3 Relay SP C

•Alarm Combination (can be any combination below)

•Programmer Alarm

•Alarm 1

•Alarm 2

•Alarm 3

Relay Set Points

This menu screen is not used and should be ignored. Contact Super Systems Inc at 800-666-4330 before making any changes to this screen. This screen will allow the user to set the ON/OFF setpoints for Input 1, 2, and 3 A, B, and C relays. Selecting a setpoint to modify and pressing the Enter button will display a numeric keypad. This can range from –9999to 9999.

Analog Input Setup

This menu option displays a two-level screen with the top level showing the three inputs. Use the blue up and down arrow keys to select one of the inputs.

Pressing the “Enter” key takes you to a menu of parameters that can be assigned to any of the three inputs. Included are thermocouples, voltage, and current inputs.

The lower zone of the “Analog Input Setup” screen contains a table:

Parameter	Value
TC Type	S
Filter Time	0
Initial Scale	0
Full Scale	3000
Decimal Point Location	0
Open TC	Up scale
Input offset	0

SSi Manual SERIES 9210-M4557-Nitriding Page 29 of 29