Star Micronics NX-2430 manual chapter, Default Settings=Eds Mode, How To Set The Eds Mode

chapter 5

DEFAULT SETTINGS=EDS MODE

From the control panel you can change the parameters that define how your printer works. These parameters become your power-on settings.This func- tion is called the Electronic DIP Switch (EDS) mode.

HOW TO SET THE EDS MODE

The EDS mode in this printer has 16functions that you can set as the power- on default.

Turn the printer on while simultaneously holding the -,	-,	and
EJECT/PARK ] buttons.

The “EDS” message will show on the LCD display. This indicates that you have entered the EDS mode.

In EDS mode, the buttons on the control panel are used as shown below in Figure 5-1.

Select Select Change Print Exit

Bank Switch setting

Figure 5-1.Buttonfunctionsin the EDS mode.

●Use the - button to select the Bank Letter.

●Use the - button to select the Switch Number.

●The LCD display on the control panel shows the current setting, ON or OFF.

Use the I EJECT/PARK~button to change the settings.

●Press the ] PAPER FEED ] button to print the current settings.

●Press the I ON LINE 1button to save and exit the EDS mode.

49