Star Micronics NX-2430 manual Install the printer cover provided with the Automatic Sheet Feeder

6.Lower the rear side of the Automatic Sheet Feeder and attach it to the holder shaft.

7.Install the printer cover provided with the Automatic Sheet Feeder.

I

Figure 7-4. Installthe printercover.

8.Insert the hopper attachment on top of the hopper support section as shown in Figure 7-5.

I

Figure 7-5.Insert the hopper attachment.

9.Insert the stacker attachment into the holder on the front part of the sheet feeder.

NOTE: The flat side of the attachment should be located to the rear, as shown in Figure 7-6.

Now, you can use the ASF by installing the paper stack into the hopper.