●Printer test works, but printer does not print when attached to computer
Probable Cause | ] Action |
Printer cable has | Make sure that the printer cable is correctly connected at |
a problem. | both ends, printer and computer. |
Problem with | Refer to your application program manual. |
the application |
|
program. |
|
Incorrect | Select the other emulation with the EDS setting. |
emulation is | See Chapter 5. |
selected. |
|
●Printer sounds the audible alarm
Probable Cause I Action
Thismightindicatf Check the message on the display and the status of the an erroror normal control panel indicators and see “Conditions indicated by
operation. | messages and tones” in Chapter 4. |
●Pitch or font selected is being changed
Probable Cause I Action
Your software is Set your printer in Font/Pitch lock. See “Pitch lock overriding your mode” and “Font lock mode” in Chapter 4.
control panel selection.
58