●Printer does not feed paper
Probable Cause Action
Paperisjamming. Remove all forms and pieces of paper.
Bailleveris closed Open the bail lever. Bail lever automatically closed when before paper goes the paper goes through the bail lever location. throughthe baille-
ver location.
Adjustment lever Check the setting of the adjustment lever. See “Adjusting is set incorrectly. the printing gap” in Chapter 3.
Fanfold form is Move bail lever forward to unpark the fanfold paper. parked.
●Line spacing is incorrect or overprinting occurs
Probable Cause
The tractor posi- tions are incor- rectly adjusted.
Action
Adjustthe tractor positions. See “Loading fanfold forms” in Chapter 3.
Incorrect emula- Select the other emulation with the EDS setting. See
tion is selected. Chapter 5.
Problem with the Refer to your application program manual. application
program.
Platen knob was manually turned while the Power indicator was on.
Set the top of form. See “Top of form” in Chapter 4. Do not manually turn the platen knob when the power is on. Use the I PAPER FEED [button.
Forms are jam- ming between printing surface and the print head.
Reset adjustment lever. See “Adjusting the printing gap” in Chapter 3.
59
