DIP Switch Functions on The Converter
It is necessary to make compatible the data transfer conditions between the computer and the serial interface board with the DIP switch settings on the converter.
Following table shows the functions of the DIP switches on the Serial- Parallel Converter.
[Parity condition]
|
|
| Switch 2 | Switch 5 | Condition | |
3 | Data Protocol | (Refer below) |
| ‘oParity | ||
4 | OFF | ON | Odd parity | |||
|
| |||||
5 | Parity condition | (Refer below) | OFF | OFF | Even parity |
6
[Data protocol]
7 Transfer speed (Refer below) I
8I
Switch3 ] Switch4 I Protocol I ON I ON I DTR I
ON OFF XON/XOFF
OFF ON ETX/ACK
[Transfer speed]
rSwitch6 | I | Switch7 | ] | Switch8 | ] | Transfer speed I |
[ OFF | I | OFF | I | OFF | I | 150 BPS |
| I |
| I | ON | 1 | 300 BPS |
OFF |
| OFF |
|
|
79
