Sub-Zero ICB700TFI, ICB700TCI, ICB700TR installation instructions U N Pa C K I N G A N D M O V I N G

I N T E G R AT E D INSTALLATION INSTRUCTIONS

U N PA C K I N G A N D M O V I N G A N T I - T I P B R AC K E T I N S TA L L AT I O N

Uncrate the unit, remove its wood base and discard the shipping bolts that hold the wood base to the bottom of the unit. Remove all packing materials and tape.

IMPORTANT NOTE: Do not discard the kickplate/grille, anti-tip bracket and hardware. These items will be needed for the installation.

Retract the front leveling legs to allow you to move the unit more easily during installation. You will extend the leveling legs when the unit is in its final position to reduce the possibility of the unit tipping forward.

Use an appliance dolly to move the Integrated unit. Position the dolly at the side of the unit to prevent damage to finished surfaces. Secure the door and/or drawers so they do not open while moving the unit.

Before moving the Integrated unit into position, protect any finished flooring with appropriate materials.

To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with the anti-tip blocking bracket.

An anti-tip bracket and hardware is provided with the Integrated unit. The anti-tip bracket must be installed on a solid base.

If you are installing the unit in a space deeper than 610 mm, be sure to locate the anti-tip bracket so that it engages the unit properly. It is important that the anti-tip bracket is placed 610 mm from the front of the unit without panels, to the the back of the anti-tip bracket. Refer to illustrations 1 and 2 below and note that for 686 mm wide units dimension A is 343 mm, and 457 mm for 914 mm wide units.

12