Sun Microsystems 816-7727-10 manual Oval cutouts

5.Group the cords and cables and insert each group into the oval cutouts.

Use both oval cutouts in the center section to route different groups of cords and cables through the cable management arm. For example, you can group the power cords and insert them into one oval cutout, and then group the other cables and insert them into the other oval cutout.

Note – Do not insert the cords or cables into the round cutouts. Use those cutouts to access and manipulate the cords or cables.

Oval cutouts

Note – You can route the power cords to emerge at either the right or the left side of the server. The above illustration shows the cords routed to the right as seen from the back of the server. See the section, “Install the Cable Management Arm” on page 20, Step 3b, for instructions.

6.Secure the cords and cables to the third section of the cable management arm using the Velcro straps.

Chapter 2 Installing a Sun Fire V440 Server Into a 4-Post Cabinet 27