Sun Microsystems 816-7727-10 manual Tools Required for Rackmounting

The plastic bags of hardware contain screws and nuts that are shown below in actual size.

10-32 8-32 M6 M4 8-32 M6 10-32

Any screws not used for rackmounting are spares.

Note – Bar nuts are required (but not included) for non-threaded cabinets. See the instructions provided with your cabinet for more information.

Tools Required for Rackmounting

■Phillips No. 2 screwdriver (Use to tighten 10-32 and M6 screws.)

■Set of appropriate Allen wrenches to remove the side panels on some cabinets

■Adjustable wrench to tighten the nuts on the mounting brackets

8 Sun Fire V440 Server Installation Guide • July 2003