2.Locate the oval cutouts in the center section of the cable management arm and the Velcro straps in the first and third sections.
The cutouts and straps enable you to route the cables and cords and to secure them to the cable management arm.
Upper lip
Velcro straps
Oval cutouts
First section
Velcro straps
3.Route the cords and cables between the upper and lower lips of the first section of the cable management arm.
Ensure that cords and cables provide enough slack to allow routing, yet are taut enough to avoid obstruction of the slide assemblies.
4.Tie the cords and cables to the first section of the cable management arm.
Use the Velcro straps to tie the cables to the cable management arm. How you tie the straps to the cable management arm depends on the size and number of your cables. For example, for a smaller bundle of cables, thread the Velcro straps through the slots in the upper and lower lips. For a larger bundle of cables, wrap the straps completely around the cables and the cable management arm.
