Sun Microsystems EC000066 manual Attaching the outer/middle rail assembly to the rack

INSTALLING THE VTL VALUE APPLIANCE IN AN EQUIPMENT RACK

▼Attaching the outer/middle rail assembly to the rack

1.Before you begin, push the middle rail into the corresponding outer rail so that the ends are more or less flush. To do this, release the spring-activated slide-rail lock (A below) by pushing twice in the direction shown (B), then telescope the middle rail into the outer rail (C):

B

A

C

D

2.Adjust the length of the middle/outer slide-rail assemblies to the distance between the front and rear posts of the rack (D above).

8 VTL Value Hardware Installation Guide • Aug 2007 A • 316196101