Sun Microsystems EC000066 manual VTL Value Hardware Installation Guide Aug

INSTALLING THE VTL VALUE APPLIANCE IN AN EQUIPMENT RACK

Caution – To reduce the risk of serious personal injury or equipment damage, use a mechanical lift when mounting the server in the rack. If a lift is not available, remove components as described in the section “Obtaining required tools, personnel, and materials” on page 2 and following.

1.Pull the middle rails out from the outer rails, past the internal stop, so that the middle rails are about 1.5 inches from the front face of the rail mounting bracket (A below).

B

C

D

A

2.Make sure that the outer-rail ball-bearing retainer (B above) is pulled to front of rail.

3.Make sure that the spring tab on the outer rail ball-bearing retainer is securely latched over the dimple on the middle slide rail (C above).

14 VTL Value Hardware Installation Guide • Aug 2007 A • 316196101